#if !defined(__RPI_ARTNET_OP_CODES_H__) #define __RPI_ARTNET_OP_CODES_H__ /* List of hex values and discriptions of Opcodes */ /* This is an ArtPoll packet, no other data is contained in this UDP packet */ #define OpPoll 0x2000 /* This is an ArtPollReply Packet. It contains device status information. */ #define OpPollReply 0x2100 /* Diagnostics and data logging packet. */ #define OpDiagData 0x2300 /* Used to send text based parameter commands. */ #define OpCommand 0x2400 /* This is an ArtDmx data packet. It contains zero start code DMX512 information for a single * Universe. */ #define OpOutput 0x5000 /* This is an ArtDmx data packet. It contains zero start code DMX512 information for a single * Universe. */ #define OpDmx 0x5000 /* This is an ArtNzs data packet. It contains non-zero start code (except RDM) DMX512 information * for a single Universe. */ #define OpNzs 0x5100 /* This is an ArtAddress packet. It contains remote programming information for a Node. */ #define OpAddress 0x6000 /* This is an ArtInput packet. It contains enable – disable data for DMX inputs. */ #define OpInput 0x7000 /* This is an ArtTodRequest packet. It is used to request a Table of Devices (ToD) for RDM * discovery. */ #define OpTodRequest 0x8000 /* This is an ArtTodData packet. It is used to send a Table of Devices (ToD) for RDM discovery. */ #define OpTodData 0x8100 /* This is an ArtTodControl packet. It is used to send RDM discovery control messages. */ #define OpTodControl 0x8200 /* This is an ArtRdm packet. It is used to send all non discovery RDM messages. */ #define OpRdm 0x8300 /* This is an ArtRdmSub packet. It is used to send compressed, RDM Sub-Device data. */ #define OpRdmSub 0x8400 /* This is an ArtVideoSetup packet. It contains video screen setup information for nodes that * implement the extended video features. */ #define OpVideoSetup 0xa010 /* This is an ArtVideoPalette packet. It contains colour palette setup information for nodes that * implement the extended video features. */ #define OpVideoPalette 0xa020 /* This is an ArtVideoData packet. It contains display data for nodes that implement the extended * video features. */ #define OpVideoData 0xa040 /* This is an ArtMacMaster packet. It is used to program the Node’s MAC address, Oem device type and * ESTA manufacturer code. This is for factory initialisation of a Node. It is not to be used by * applications. */ #define OpMacMaster 0xf000 /* This is an ArtMacSlave packet. It is returned by the node to acknowledge receipt of an * ArtMacMaster packet. */ #define OpMacSlave 0xf100 /* This is an ArtFirmwareMaster packet. It is used to upload new firmware or firmware extensions to * the Node. */ #define OpFirmwareMaster 0xf200 /* This is an ArtFirmwareReply packet. It is returned by the node to acknowledge receipt of an * ArtFirmwareMaster packet or ArtFileTnMaster packet. */ #define OpFirmwareReply 0xf300 /* Uploads user file to node. */ #define OpFileTnMaster 0xf400 /* Downloads user file from node. */ #define OpFileFnMaster 0xf500 /* Node acknowledge for downloads. */ #define OpFileFnReply 0xf600 /* This is an ArtIpProg packet. It is used to reprogramme the IP, Mask and Port address of the Node. */ #define OpIpProg 0xf800 /* This is an ArtIpProgReply packet. It is returned by the node to acknowledge receipt of an * ArtIpProg packet. */ #define OpIpProgReply 0xf900 /* This is an ArtMedia packet. It is Unicast by a Media Server and acted upon by a Controller. */ #define OpMedia 0x9000 /* This is an ArtMediaPatch packet. It is Unicast by a Controller and acted upon by a Media Server. */ #define OpMediaPatch 0x9100 /* This is an ArtMediaControl packet. It is Unicast by a Controller and acted upon by a Media * Server. */ #define OpMediaControl 0x9200 /* This is an ArtMediaControlReply packet. It is Unicast by a Media Server and acted upon by a * Controller. */ #define OpMediaContrlReply 0x9300 /* This is an ArtTimeCode packet. It is used to transport time code over the network. */ #define OpTimeCode 0x9700 /* Used to synchronise real time date and clock */ #define OpTimeSync 0x9800 /* Used to send trigger macros */ #define OpTrigger 0x9900 /* Requests a node's file list */ #define OpDirectory 0x9a00 /* Replies to OpDirectory with file list */ #define OpDirectoryReply 0x9b00 #endif // __RPI_ARTNET_OP_CODES_H__