LedBars/RpiLedBars/res/.asoundrc
2021-07-28 21:26:40 +01:00

51 lines
1.5 KiB
Plaintext

#The below 2 sections are commented, they control the default sound card to use
#This set up is for a Pi with an I2S microphone attached using the guide
#from adafruit at
# https://learn.adafruit.com/adafruit-i2s-mems-microphone-breakout
#Uncomment and the I2S will be your default card (assuming same setup)
#but you won't get audio playback because both recording and playback will be
#defaulted
#TODO - Figure out how to set default for recording separately
#To adjust use aplay -l to work out the devices you have and their card number
#For recording devices use arecord -l
#pcm.!default {
# type hw
# card 1
#}
#ctl.!default {
# type hw
# card 1
#}
#This section makes a reference to your I2S hardware, adjust the card name
# to what is shown in arecord -l after card x: before the name in []
#You may have to adjust channel count also but stick with default first
pcm.dmic_hw {
type hw
card sndrpii2scard
channels 1
format S32_LE
}
#This is the software volume control, it links to the hardware above and after
# saving the .asoundrc file you can type alsamixer, press F6 to select
# your I2S mic then F4 to set the recording volume and arrow up and down
# to adjust the volume
# After adjusting the volume - go for 50 percent at first, you can do
# something like
# arecord -D dmic_sv -c2 -r 48000 -f S32_LE -t wav -V mono -v myfile.wav
pcm.dmic_sv {
type softvol
slave.pcm dmic_hw
control {
name "Boost Capture Volume"
card sndrpii2scard
}
min_dB -3.0
max_dB 30.0
}