LedBars/RpiLedBars/hw/LedBarsHat/LedBarsHat.rules
2021-07-28 22:27:21 +02:00

83 lines
2.3 KiB
Plaintext

(rules PCB LedBarsHat
(snap_angle
fortyfive_degree
)
(autoroute_settings
(fanout off)
(autoroute on)
(postroute on)
(vias on)
(via_costs 50)
(plane_via_costs 5)
(start_ripup_costs 100)
(start_pass_no 104)
(layer_rule F.Cu
(active on)
(preferred_direction vertical)
(preferred_direction_trace_costs 1.0)
(against_preferred_direction_trace_costs 2.2)
)
(layer_rule B.Cu
(active on)
(preferred_direction horizontal)
(preferred_direction_trace_costs 1.0)
(against_preferred_direction_trace_costs 1.9)
)
)
(rule
(width 250.0)
(clear 200.2)
(clear 125.0 (type smd_to_turn_gap))
(clear 50.0 (type smd_smd))
)
(padstack "Via[0-1]_800:400_um"
(shape
(circle F.Cu 800.0 0.0 0.0)
)
(shape
(circle B.Cu 800.0 0.0 0.0)
)
(attach off)
)
(via
"Via[0-1]_800:400_um" "Via[0-1]_800:400_um" default
)
(via
"Via[0-1]_800:400_um-kicad_default" "Via[0-1]_800:400_um" "kicad_default"
)
(via_rule
default "Via[0-1]_800:400_um"
)
(via_rule
"kicad_default" "Via[0-1]_800:400_um-kicad_default"
)
(class default
(clearance_class default)
(via_rule default)
(rule
(width 250.0)
)
(circuit
(use_layer F.Cu B.Cu)
)
)
(class "kicad_default"
GND "Net-(J1-Pad3)" VCC "Net-(J1-Pad5)" "/SMI_SD13" "/I2S_SD" "/SEL_MODE3" "/SMI_SD8"
"/I2S_WS" "/SMI_SD5" "/SMI_SD4" "/SEL_MODE2" "/SEL_MODE1" "/SMI_SD0" "/SMI_SD3" "/SMI_SD17"
"/SMI_SD1" "/SMI_SD2" "/SMI_SD16" +3V3 "/SMI_SD15" "/SMI_SD14" "/I2S_CLK" "/SMI_SD9"
"/SMI_SD7" "/SMI_SD6" +5V +12V "Net-(R3-Pad1)" "/SEL_MODE0" "Net-(J1-Pad7)" "Net-(J1-Pad13)"
"Net-(J1-Pad26)" "Net-(J1-Pad27)" "Net-(J1-Pad28)" "Net-(J_OUT1-Pad1)" "Net-(J_OUT1-Pad2)" "Net-(J_OUT1-Pad3)" "Net-(J_OUT1-Pad4)" "Net-(J_OUT1-Pad5)"
"Net-(J_OUT1-Pad6)" "Net-(J_OUT1-Pad7)" "Net-(J_OUT1-Pad8)" "Net-(J_OUT2-Pad1)" "Net-(J_OUT2-Pad2)" "Net-(J_OUT2-Pad3)" "Net-(J_OUT2-Pad4)" "Net-(J_OUT2-Pad5)"
"Net-(J_OUT2-Pad6)" "Net-(J_OUT2-Pad7)" "Net-(J_OUT2-Pad8)" "Net-(OUT_5V1-Pad3)" "Net-(OUT_5V1-Pad2)" "Net-(OUT_5V1-Pad5)" "Net-(R1-Pad1)" "Net-(R2-Pad2)"
"Net-(U1-Pad9)"
(clearance_class "kicad_default")
(via_rule kicad_default)
(rule
(width 250.0)
)
(circuit
(use_layer F.Cu B.Cu)
)
)
)